Water Heater Repair Tips and Guides

No Hot Water? How to Troubleshoot a Gas or Electric Water Heater

When there's no hot water, the cause is often simple: a tripped breaker on an electric heater, or a pilot light that's gone out on a gas heater. Some causes, like a failed gas valve or a burned-out element, need a plumber. Start with the safe checks below.

First: safety

If you smell gas, don't try to relight anything or flip switches. Leave the house and call your gas company or 911 from outside.

Gas water heaters

  1. Check the gas supply. Make sure the gas valve on the line to the heater is open, and that other gas appliances in the house work.
  2. Look at the pilot. Many older heaters have a small window near the bottom. If you can't see a flame, the pilot may be out.
  3. Relight it, following the label. Most heaters have lighting instructions printed on the tank. Follow them exactly.
  4. If the pilot won't stay lit, the thermocouple or flame sensor may be bad, or the gas valve may have failed. That's a job for a plumber.
  5. Newer heaters may use electronic ignition and show a flashing status light. The pattern often points to the problem; check the manual.

Electric water heaters

  1. Check the breaker. Electric water heaters use a large double breaker. If it's tripped, reset it once.
  2. If it trips again, don't keep resetting it. A shorted element or wiring problem needs a professional.
  3. Check the high-limit reset button. Many electric heaters have a red reset button behind an access panel. Turn the power off at the breaker before opening the panel.
  4. If the water is lukewarm, one of the two heating elements may have burned out.

Not enough hot water

If you have some hot water but it runs out quickly:

  • Sediment may have built up in the tank, which is common with Phoenix's hard water
  • A heating element or thermostat may have failed on an electric unit
  • The dip tube may be broken, mixing cold water into the hot
  • The heater may simply be too small for your household

When to call a plumber

  • The pilot won't stay lit
  • The breaker keeps tripping
  • You see water around the base of the tank
  • The water smells or looks rusty
  • You're not comfortable working with gas or electrical parts

Get help

Local plumbers handle no-hot-water calls across Phoenix, Scottsdale, Tempe, Mesa, Chandler, Gilbert, Glendale and Peoria. Send a request below or call (480) 788-5344.

Get a free quote

A few details and a local pro will reach out.

Prefer to talk? Call (480) 788-5344