Water Heater Repair Tips and Guides

Why Your Water Heater Is Popping or Rumbling (and What to Do)

Popping or rumbling from a water heater almost always means sediment has built up at the bottom of the tank. In Phoenix, where the water is hard, minerals settle out every time the tank heats. Water trapped under that layer boils in small bursts, which makes the noise. Flushing the tank usually quiets it down.

Why sediment builds up

Valley tap water carries dissolved minerals, mostly calcium and magnesium. When water is heated, some of those minerals come out of solution and settle to the bottom of the tank. Over months and years, the layer grows.

Why it matters

  • Efficiency. The sediment layer insulates the water from the burner, so the heater runs longer to heat the same amount of water.
  • Less hot water. Sediment takes up space in the tank.
  • Wear and tear. Overheating at the bottom of the tank can stress the metal and shorten the heater's life.
  • Electric heaters. Sediment can bury the lower element and cause it to burn out.

Other sounds and what they mean

  • Hissing or sizzling: water dripping onto the burner, possibly from a leak or condensation
  • Ticking: pipes expanding and contracting, usually harmless
  • Screeching: a partly closed valve restricting flow
  • Banging in the pipes: water hammer, which can sometimes be fixed with an arrestor

How a flush helps

A flush drains the tank and rinses out the sediment. A plumber connects a hose to the drain valve, runs the water until it comes out clear, and may stir up stubborn sediment with short bursts of cold water. HomeGuide puts a professional flush at about $75 to $250.

If the tank is very old and the sediment has hardened, a flush may not clear it, and the drain valve can clog. In that case, the plumber may recommend replacement.

How often to flush

Many plumbers recommend flushing once a year in hard-water areas like Phoenix. A water softener slows the buildup, but tanks still benefit from periodic flushing.

Check the anode rod too

The anode rod is a metal rod that corrodes so the tank doesn't. In hard water it can wear out faster. Having it checked during a flush can add years to the tank.

Schedule a flush

Local plumbers flush and maintain water heaters across Phoenix, Scottsdale, Tempe, Mesa, Chandler, Gilbert, Glendale and Peoria. Send a request below or call (480) 788-5344.

Get a free quote

A few details and a local pro will reach out.

Prefer to talk? Call (480) 788-5344